Camber Kit?

[96redscare]

I have a 96 accord and have my front dropped 1.75" and my rear 1.50. I was looking at the Ingalls camber kit but they have two types, which one should I get? The kit that goes from 0 to -1.25degrees or the kit that goes from -1.25 to -3degrees. Also the rear camber, can I shim it out with some bolts and washers, or do I have to order a new tie rod bar. By the way, what is the benefit of a new tie rod bar if I can just shim out the rear? I would appreciate any feedback :confused:

[accordy2g]

ok well for only that amount fo srop your fine with the 0-1.25 degree drop. i had my car dropped 3 inches and the correction on my camber was only 1.96 so you'll be fine with that. As for the back yeah you can shim it out, thats the cheapest way to do it and getting a new tie bar is the same things but its the "correct" way to do things. I say g owith what you want it really makes no difference at least your tires wont camber anymore :)

[candymanjl]

yeah, I'd spend the money up front where the cambor is worse, and go ahead and shim the back if funds start to run dry.

______________
B16A Turbo CRX