camber kit

[minhman]

Sorry, here's another "how hard is it" question. How hard is it to install a camber kit on my 4th gen prelude? Do I adjust the degree or is it fixed? I have no clue, but I really want to do it myself so I could learn. Thanks. :confused:

[Camuman]

did you already lower the car or are you doing both at the same time? i am not sure about the lude but when i lowered my friends accent we just used camber bolts that adjusted it about 1 degree tofix the camer.

-------------
>91 Z28 in storage!!!
>2002 JETTA 1.8t 5M(Mad Boost Machine)
APR Chip w/5 prog:ATP 3" dp with !cat:ATP lower motor mount:GFB DV/BOV
N75 Race Valve:BMC CDA intake:Alientech window controller
Pioneer P1R:6 channel PPI Amp
SUPERPIMPS, LTD

[candymanjl]

the cambor on hondas is fixed, you'll need a cambor kit. for the fron it replaces the upper arm and has a bracket to move the upper ball joint in/out to correct the cambor. the rear is this bar looking thingy that'll adjust the upper arm length.

______________
B16A Turbo CRX

[accordy2g]

its not hard at all all you do is remove the arm in the front and throw in that camber arm and for the back you replace the arm. All you would have to get done is an alignment which can be done anywhere.

[minhman]

thanks everyone for great advices. :)

[accordy2g]

no problem man let us know how it turns out. hope we helped